Unit · AXIAL-PISTON PUMP
AL A10V O 18 EP2ED/53R-VSC12K01P -S5472R902567035
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO18EP2ED/53R-VSC12K01P-S5472, material number R902567035. Nominal size: NG 18. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with electrohydraulic pressure control U = 24 V (EP2ED). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP (K01). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 5472.
- Number
- R902567035
- Type code
- AL A10V O 18 EP2ED/53R-VSC12K01P -S5472
- Group
- A10VO 18
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902555339 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902547817 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902439082 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902465815 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 6 | R902503574 | INTERMEDIATE PLATE | 1 | |
| 7 | R902434482 | SEAL | 2 | |
| 8 | R910126454 | SOCKET HEAD CAP SCREW | 4 | |
| 9 | R909831568 | SAFETY CAP | 1 | |
| 10 | R902532435 | SAFETY CAP | 1 | |
| 27 | R910943528 | SPLINED COUPLING | 1 | |
| 30 | R910901969 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 18 | 18 |
| Control device | with electrohydraulic pressure control U = 24 V | EP2ED |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP | K01 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |