Unit · AXIAL-PISTON PUMP
AL A10V O 63EP2EF/53R-VSC12K15P -S5463R902567096
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO63EP2EF/53R-VSC12K15P-S5463, material number R902567096. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Through drive: 127-4 (C) 1 1/4 in 14T 12/24DP (K15). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 5463.
- Number
- R902567096
- Type code
- AL A10V O 63EP2EF/53R-VSC12K15P -S5463
- Group
- A10VO 63
- Edition
- 07/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902567097 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902567079 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902439082 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902438532 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 5 | R910764647 | SCREW PLUG | 2 | |
| 6 | R902480140 | INTERMEDIATE PLATE Assembly parts list →L | 1 | |
| 7 | R909154493 | SAFETY CAP | 2 | |
| 8 | R902434482 | SEAL | 1 | |
| 9 | R910126454 | SOCKET HEAD CAP SCREW | 4 | |
| 27 | R902436085 | SPLINED COUPLING | 1 | |
| 30 | R910967343 | SCREW PLUG | 3 | |
| 40 | R910947854 | STOP SCREW | 1 | |
| 41 | R910998240 | NUT | 1 | |
| 42 | R910961839 | CAP NUT | 1 | |
| 43 | R910804886 | O-RING | 2 | |
| 50 | R902515765 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Through drive | 127-4 (C) 1 1/4 in 14T 12/24DP | K15 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |