Unit · AXIAL-PISTON PUMP
PL A4VSG 71 EPG /11R-AZB60KB34N-S1691R902567124
Axial piston pump Bosch Rexroth series A4VSG, type code PLA4VSG71EPG/11R-AZB60KB34N-S1691, material number R902567124. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (400 bar) metric (A4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft DIN 5480 (Z). Working port: SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread (60). Through drives: 100, 2-hole 7/8 in 13T 16/32DP (KB3). Valves: SDVB 16 valve block mounted (With directly controlled flushing slide and pilot operated high-pres- sure relief valve) (4). Filtration: without filter (N). Special version no. 1691.
- Number
- R902567124
- Type code
- PL A4VSG 71 EPG /11R-AZB60KB34N-S1691
- Group
- A4VSG 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902566847 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902567123 | CONTROL Assembly parts list →L | 1 | |
| 6 | R902447981 | VALVE INSERT | 2 | |
| 8 | R902443328 | PIPING Assembly parts list →L | 1 | |
| 9 | R902464910 | VALVE BLOCK Assembly parts list →L | 1 | |
| 12 | R902650897 | CLAMP | 1 | |
| 17 | R910984005 | ADAPTER Assembly parts list →L | 2 | |
| 18 | R909157039 | SCREW PLUG | 3 | |
| 61 | R902400581 | FLANGE COVER | 2 | |
| 62 | R902603191 | SEAL SCREW | 1 | |
| 64 | R902603191 | SEAL SCREW | 1 | |
| 65 | R902603190 | SEAL SCREW | 1 | |
| 66 | R902602015 | SEAL SCREW | 3 | |
| 71 | R902602977 | FLANGE COVER | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (400 bar) metric | A4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 71 | 71 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Working port | SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread | 60 |
| Through drives | 100, 2-hole 7/8 in 13T 16/32DP | KB3 |
| Valves | SDVB 16 valve block mounted (With directly controlled flushing slide and pilot operated high-pres- sure relief valve) | 4 |
| Filtration | Without filter | N |