Unit · AXIAL-PISTON PUMP
AL A10V O 71 DFLR/31R-VSC42P33R902567644
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO71DFLR/31R-VSC42P33, material number R902567644. Nominal size: NG 71. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft Clockwise (R). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections according to ISO 6162, working ports metric Fastening thread metric; lateral top bottom (42). Connector for solenoids: DEUTSCH - molded connector, 2-pin, without suppressor diode (P).
- Number
- R902567644
- Type code
- AL A10V O 71 DFLR/31R-VSC42P33
- Group
- A10VO 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902462085 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R910932943 | ADAPTER Assembly parts list →L | 1 | |
| 5 | R910934572 | ADAPTER Assembly parts list →L | 1 | |
| 10 | R910963791 | PIPING Assembly parts list →L | 1 | |
| 11 | R902567645 | POWER DIAGRAM | 1 | |
| 12 | 0510765140 | HYDRAULIC GEAR PUMP | 1 | |
| 61 | R910109762 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 71 | 71 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Clockwise | R |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange connections according to ISO 6162, working ports metric Fastening thread metric; lateral top bottom | 42 |
| Connector for solenoids | DEUTSCH - molded connector, 2-pin, without suppressor diode | P |