Unit · AXIAL-PISTON PUMP
A A10VZO071LA9D0/10R-VRD22U680R902568087
Axial piston pump Bosch Rexroth series A10FZO, type code AA10VZO071LA9D0/10R-VRD22U680, material number R902568087. Nominal size: NG 71. Axial piston unit: swashplate design, variable (A10V). Application area: variable-speed drives (Z). Operating mode: pump, open circuit (O). Control device 003: NG 018 to 180, torque controller Beginning of control over 240 bar (LA9D0). Direction of rotation 003: viewed on drive shaft clockwise (R). Sealing material 003: FKM (fluorocarbon rubber) (V). Drive shaft 003: splined shaft ISO 3019-1 similar to shaft "S" however for higher torque (R). Mounting flange 003: based on ISO 3019-1 (SAE) 4-hole (D). Through drive 003: 101-2 (B) 7/8 in 13T 16/32DP (U68). Connector for solenoids 003: without, with hydraulic controllers (0).
- Number
- R902568087
- Type code
- A A10VZO071LA9D0/10R-VRD22U680
- Group
- A10VZO 71
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902559768 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902567674 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533222 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902496478 | ATTACHMENT KIT | 1 | |
| 10 | R902448747 | PIPING Assembly parts list →L | 1 | |
| 14 | R910764647 | SCREW PLUG | 1 | |
| 30 | R910967343 | SCREW PLUG | 1 | |
| 34 | R913011609 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable | A10V |
| Application area | Variable-speed drives | Z |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 71 | 071 |
| Control device 003 | NG 018 to 180, torque controller Beginning of control over 240 bar | LA9D0 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation 003 | Viewed on drive shaft clockwise | R |
| Sealing material 003 | FKM (fluorocarbon rubber) | V |
| Drive shaft 003 | Splined shaft ISO 3019-1 similar to shaft "S" however for higher torque | R |
| Mounting flange 003 | Based on ISO 3019-1 (SAE) 4-hole | D |
| Through drive 003 | 101-2 (B) 7/8 in 13T 16/32DP | U68 |
| Connector for solenoids 003 | Without, with hydraulic controllers | 0 |