Unit · AXIAL-PISTON PUMP

A15VSO110PRDGA0V/11MR+A10FZO010/10RR902570287

Axial piston pump Bosch Rexroth series A15VSO, type code A15VSO110PRDGA0V/11MR+A10FZO010/10R, material number R902570287. Nominal size: NG 110. Axial piston unit: variable swashplate design, nominal pressure 350bar, maximum pressure 420 bar (A15V). Operating mode: pump, Without charge pump open circuit (SO). Swiveling range: one-sided swiveling Vg max: + 50% to + 100% Vg min: - 5% to + 30% (P). Depressurized basic position and external control pressure supply: basic position maximum swivel angle (Vg max), without external control pressure supply (standard for power and pressure controllers) (A). Connector for solenoids: without connector (without solenoid, only for hydraulic control) (0). Swivel angle sensor: optical swivel angle indicator (only for A15VSO) (V). Version of port and fastening threads: metric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DIN (M). Direction of rotation: viewed on drive shaft Clockwise (R).

Number
R902570287
Type code
A15VSO110PRDGA0V/11MR+A10FZO010/10R
Group
A15VSO 110
Edition
06/2020

This parts list has no drawing.

Pos.NumberNameQtyAdd to inquiry
1R902570288AXIAL-PISTON PUMP Assembly parts list →L1
2R902518486AXIAL-PISTON PUMP Assembly parts list →L1
3R902650189WASHER2
4R916445072SOCKET HEAD CAP SCREW2

Parameters from the type code

ItemMeaningCode
Axial piston unitVariable swashplate design, nominal pressure 350bar, maximum pressure 420 barA15V
Operating modePump, Without charge pump open circuitSO
Size (NG)110110
Swiveling rangeOne-sided swiveling Vg max: + 50% to + 100% Vg min: - 5% to + 30%P
Depressurized basic position and external control pressure supplyBasic position maximum swivel angle (Vg max), without external control pressure supply (standard for power and pressure controllers)A
Connector for solenoidsWithout connector (without solenoid, only for hydraulic control)0
Swivel angle sensorOptical swivel angle indicator (only for A15VSO)V
Version of port and fastening threadsMetric ports based on ISO 6149 with O-ring seal, metric fastening threads according to DINM
Direction of rotationViewed on drive shaft ClockwiseR