Unit · AXIAL-PISTON PUMP
LA15VLO210L4DRS0DP0/11ALVE4T1PC3S70-0ER902571057
Axial piston pump Bosch Rexroth series A15VSO, type code LA15VLO210L4DRS0DP0/11ALVE4T1PC3S70-0E, material number R902571057. Nominal size: NG 210. Axial piston unit: variable swashplate design, nominal pressure 5100 psi (350 bar), maximum pressure 6100 psi (420 bar) (LA15V). Operating mode: pump, open circuit With charge pump (LO). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (only for electric controls U7) (P). Swivel angle sensor: without swivel angle sensor (only for A15VLO) (0). Version of port and fastening threads: connection ports based on ISO 11926 with O-ring seal (ANSI), fastening threads according to ASME B1.1 at working ports and through drive (A). Direction of rotation: viewed on drive shaft Counter-clockwise (L). Sealing material: FKM (fl uorocarbon rubber) (V). Mounting fl ange: SAE J744 165-4 (E4). Drive shaft: splined shaft ANSI B92.1a 1 3/4 in 13T 8/16DP (T1). Rotary group version: effi ciency and speed optimized (version with and without charge pump) (P). Through drives: 127-2 (C) C3 1 1/4 in 14T 12/24DP S7 (C3S7). Pressure sensors and other sensors: without sensor (0). Standard/special version: standard version (0).
- Number
- R902571057
- Type code
- LA15VLO210L4DRS0DP0/11ALVE4T1PC3S70-0E
- Group
- A15VLO 210
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902571058 | AXIAL-PISTON PUMP Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Variable swashplate design, nominal pressure 5100 psi (350 bar), maximum pressure 6100 psi (420 bar) | LA15V |
| Operating mode | Pump, open circuit With charge pump | LO |
| Size (NG) | 210 | 210 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (only for electric controls U7) | P |
| Swivel angle sensor | Without swivel angle sensor (only for A15VLO) | 0 |
| Version of port and fastening threads | Connection ports based on ISO 11926 with O-ring seal (ANSI), fastening threads according to ASME B1.1 at working ports and through drive | A |
| Direction of rotation | Viewed on drive shaft Counter-clockwise | L |
| Sealing material | FKM (fl uorocarbon rubber) | V |
| Mounting fl ange | SAE J744 165-4 | E4 |
| Drive shaft | Splined shaft ANSI B92.1a 1 3/4 in 13T 8/16DP | T1 |
| Rotary group version | Effi ciency and speed optimized (version with and without charge pump) | P |
| Through drives | 127-2 (C) C3 1 1/4 in 14T 12/24DP S7 | C3S7 |
| Pressure sensors and other sensors | Without sensor | 0 |
| Standard/special version | Standard version | 0 |