Unit · AXIAL-PISTON PUMP
AL A10V O 60ED72/52L-VUC11N00P-S5682*PT*R902571316
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO60ED72/52L-VUC11N00P-S5682*PT*, material number R902571316. Nominal size: NG 60. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: electric U = 24 V (ED72). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive (11). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P).
- Number
- R902571316
- Type code
- AL A10V O 60ED72/52L-VUC11N00P-S5682*PT*
- Group
- A10VO 60
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902571317 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902547613 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R902411891 | INTERMEDIATE PLATE | 1 | |
| 6 | R910593168 | O-RING | 3 | |
| 7 | R913011609 | SCREW PLUG | 2 | |
| 8 | R902434482 | SEAL | 1 | |
| 9 | R902601663 | SOCKET HEAD CAP SCREW | 4 | |
| 10 | R909831568 | SAFETY CAP | 1 | |
| 11 | R902532435 | SAFETY CAP | 1 | |
| 50 | R902571318 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 60 | 60 |
| Control device | electric U = 24 V | ED72 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive | 11 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |