Unit · BASE UNIT
G A10VSO 45 OV /31R-ASA12N00R902572385
Base unit Bosch Rexroth series A10VSO, type code GA10VSO45OV/31R-ASA12N00, material number R902572385. Nominal size: NG 45. Version: standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Sealing material and ATEX version: FKM (fluoroelastomer) and ATEX version II 3G Ex h IIC T4-T1 Gc X (A). Drive shafts: splined shaft Standard shaft ANSI B92.1a (S). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports, laterally opposite fastening thread, metric (12). Through drives: without through drive (N00).
- Number
- R902572385
- Type code
- G A10VSO 45 OV /31R-ASA12N00
- Group
- A10VSO 45
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902559903 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902538142 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902559712 | PUMP HOUSING | 1 | ||
| R910985654 | CONNECTION PLATE | 1 | ||
| R910961024 | SWASH PLATE Assembly parts list →L | 1 | ||
| R910992268 | DRIVE SHAFT | 1 | ||
| R910938955 | ADJUSTMENT SHIM | 1 | ||
| R910704946 | TAPERED-ROLLER BEARING | 1 | ||
| R910704954 | TAPERED-ROLLER BEARING | 1 | ||
| R910900198 | BEARING SHELL | 2 | ||
| R910916104 | SHAFT SEALING RINGD | 1 | ||
| R910793698 | O-RINGD | 1 | ||
| R913052111 | R-RINGD | 4 | ||
| R902403814 | RETAINING RING | 1 | ||
| R910220264 | SOCKET HEAD CAP SCREW | 4 | ||
| 28 | R909156650 | SCREW PLUGD | 1 | |
| R909156654 | SCREW PLUGD | 1 | ||
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R902533908 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | Standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 45 | 45 |
| Series | Series 3, index 1 | 31 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Sealing material and ATEX version | FKM (fluoroelastomer) and ATEX version II 3G Ex h IIC T4-T1 Gc X | A |
| Drive shafts | Splined shaft Standard shaft ANSI B92.1a | S |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports, laterally opposite fastening thread, metric | 12 |
| Through drives | without through drive | N00 |