Unit · AXIAL-PISTON PUMP
PL A4VSG 180 EPG /30R-AZB60K344N-S1441R902572583
Axial piston pump Bosch Rexroth series A4VSG, type code PLA4VSG180EPG/30R-AZB60K344N-S1441, material number R902572583. Nominal size: NG 180. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (400 bar) metric (A4VS). Operating mode: pump, closed circuit (G). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft DIN 5480 (Z). Working port: SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread (60). Through drives: 160, 4-hole 50x2x24x9g (K34). Valves: SDVB 16 valve block mounted (With directly controlled flushing slide and pilot operated high-pres- sure relief valve) (4). Filtration: without filter (N). Special version no. 1441.
- Number
- R902572583
- Type code
- PL A4VSG 180 EPG /30R-AZB60K344N-S1441
- Group
- A4VSG 180
- Edition
- 07/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902572662 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902572572 | CONTROL Assembly parts list →L | 1 | |
| 6 | R910906959 | VALVE MOUNTING KIT | 2 | |
| 8 | R902450310 | PIPING Assembly parts list →L | 1 | |
| 9 | R902464910 | VALVE BLOCK Assembly parts list →L | 1 | |
| 12 | R902650897 | CLAMP | 1 | |
| 17 | R910984005 | ADAPTER Assembly parts list →L | 2 | |
| 18 | R909157039 | SCREW PLUG | 3 | |
| 61 | R902400585 | FLANGE COVER | 2 | |
| 62 | R902603192 | SEAL SCREW | 1 | |
| 64 | R902603191 | SEAL SCREW | 1 | |
| 65 | R902603190 | SEAL SCREW | 1 | |
| 66 | R902602015 | SEAL SCREW | 3 | |
| 71 | R902430610 | FLANGE COVER Assembly parts list →L | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (400 bar) metric | A4VS |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 180 | 180 |
| Series | Series 3, index 0 | 30 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft DIN 5480 | Z |
| Working port | SAE flange ports A and B, UNC fastening thread located on same side, metric fastening thread | 60 |
| Through drives | 160, 4-hole 50x2x24x9g | K34 |
| Valves | SDVB 16 valve block mounted (With directly controlled flushing slide and pilot operated high-pres- sure relief valve) | 4 |
| Filtration | Without filter | N |