Unit · AXIAL-PISTON PUMP
AE A10VSO 45 DFR1/31R-PPA12N00 -SO108R902572810
Axial piston pump Bosch Rexroth series A10VSO, type code AEA10VSO45DFR1/31R-PPA12N00-SO108, material number R902572810. Nominal size: NG 45. Version: HFA, HFB, HFC hydraulic fluid (E). Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged, with flushing function (DFR1). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid (P). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: without through drive (N00). Special version no. 108.
- Number
- R902572810
- Type code
- AE A10VSO 45 DFR1/31R-PPA12N00 -SO108
- Group
- A10VSO 45
- Edition
- 07/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910909864 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902489656 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R910996456 | DIRECTIONAL SPOOL VALVE Assembly parts list →L | 1 | |
| 4 | R910921653 | ADAPTER Assembly parts list →L | 1 | |
| 5 | R902472640 | CONTROL BLOCK Assembly parts list →L | 1 | |
| 6 | R902650500 | SOCKET HEAD CAP SCREW | 4 | |
| 7 | R902417268 | SEALD | 1 | |
| 8 | R909154478 | SCREW PLUG | 1 | |
| 9 | R910785105 | SOCKET HEAD CAP SCREW | 4 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | HFA, HFB, HFC hydraulic fluid | E |
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 45 | 45 |
| Control device | with flow controller X-T plugged, with flushing function | DFR1 |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid | P |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | Without through drive | N00 |