Unit · AXIAL-PISTON PUMP
AL A10V O85EK1DC/53R-VUD12H00P -S5825R902574070
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO85EK1DC/53R-VUD12H00P-S5825, material number R902574070. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with pressure control U = 12 V (EK1D). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 5825.
- Number
- R902574070
- Type code
- AL A10V O85EK1DC/53R-VUD12H00P -S5825
- Group
- A10VO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902574071 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902572502 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902484971 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902438534 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 12 | 0510725227 | HYDRAULIC GEAR PUMP | 1 | |
| 27 | R910943560 | SPLINED COUPLING | 1 | |
| 30 | R910967351 | SCREW PLUG | 3 | |
| 40 | R902410509 | STOP SCREW | 1 | |
| 41 | R910903390 | NUT | 1 | |
| 42 | R910989878 | CAP NUT | 1 | |
| 43 | R910919314 | O-RING | 2 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 85 | 85 |
| Control device | with pressure control U = 12 V | EK1D |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |