Unit · AXIAL-PISTON PUMP
AA11VO200HDDP/10R-PZD12K01*G*R909438098
Axial piston pump Bosch Rexroth series A11VO, type code AA11VO200HDDP/10R-PZD12K01*G*, material number R909438098. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Direction of rotation: viewed on drive shaft clockwise (R). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01).
- Number
- R909438098
- Type code
- AA11VO200HDDP/10R-PZD12K01*G*
- Group
- A11VO 200
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R909441449 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909437839 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 3 | R909437635 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909437659 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909438261 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909438562 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R909432679 | HOUSING | 1 | |
| 20 | R909083530 | SETSCREW | 1 | |
| 21 | R909085976 | SETSCREW | 1 | |
| 22 | R909152459 | SEALING NUTD | 2 | |
| 23 | R913009671 | STRAIGHT PIN | 1 | |
| 24 | R909153378 | SCREW PLUGD | 1 | |
| 26 | R909086465 | SOCKET HEAD CAP SCREW | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 200 | 200 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |