Unit · AXIAL-PISTON PUMP
AA11VLO200LG2DZ/10L-NSDXXN00-SR909447286
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO200LG2DZ/10L-NSDXXN00-S, material number R909447286. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: with override pilot-pressure related positive control, with pressure cut-off (LG2D). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Through drive: ‒ ‒ (N00). Standard/special version: special version (S).
- Number
- R909447286
- Type code
- AA11VLO200LG2DZ/10L-NSDXXN00-S
- Group
- A11VLO 200
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909441447 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909434962 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R909447285 | REGULATOR Assembly parts list →L | 1 | ||
| R909437659 | CONTROL Assembly parts list →L | 1 | ||
| R909429581 | CONTROL Assembly parts list →L | 1 | ||
| R902013899 | COVER Assembly parts list →L | 1 | ||
| R909445889 | HOUSING | 1 | ||
| R909440151 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909432481 | SEALING DISK | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153378 | SCREW PLUGD | 1 | ||
| R909830077 | RETAINING RING | 1 | ||
| R909083362 | RETAINING RING | 2 | ||
| R909445547 | PARALLEL KEY | 1 | ||
| R909086230 | SHIM RING | 1 | ||
| R909086231 | SHIM RING | 1 | ||
| R909150315 | SHIM RING | 1 | ||
| R909153371 | SCREW PLUGD | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 200 | 200 |
| Control device | with override pilot-pressure related positive control, with pressure cut-off | LG2D |
| Index | Size 145 … 260 | 1 |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Through drive | ‒ ‒ | N00 |
| Standard/special version | Special version | S |