Unit · AXIAL-PISTON PUMP
A11VO160LRDH1/10R-NPD12N00R909448908
Axial piston pump Bosch Rexroth series A11VO, type code A11VO160LRDH1/10R-NPD12N00, material number R909448908. Nominal size: NG 160. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with pressure cut-off, with hydraulic negative control Δp = 25 bar stroke limiter (LRDH1). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: ‒ ‒ (N00).
- Number
- R909448908
- Type code
- A11VO160LRDH1/10R-NPD12N00
- Group
- A11VO 160
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909609897 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909608064 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| R909441738 | REGULATOR Assembly parts list →L | 1 | ||
| R909606086 | CONTROL Assembly parts list →L | 1 | ||
| R909442062 | CONTROL Assembly parts list →L | 1 | ||
| R909442074 | COVER Assembly parts list →L | 1 | ||
| R909443598 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909445855 | SETSCREW | 2 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R909153364 | SCREW PLUGD | 4 | ||
| R909830779 | SOCKET HEAD CAP SCREW | 4 | ||
| R909085367 | O-RINGD | 1 | ||
| R909153861 | SCREW PLUGD | 2 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| 40 | R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | |
| 98 | R902095631 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 160 | 160 |
| Control device | Power controller fixed setting, with pressure cut-off, with hydraulic negative control Δp = 25 bar stroke limiter | LRDH1 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | ‒ ‒ | N00 |