Unit · AXIAL-PISTON PUMP
AA11VLO250NV/10L-NSD62N00R909600462
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO250NV/10L-NSD62N00, material number R909600462. Nominal size: NG 250. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit with charge pump (LO). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: ‒ ‒ (N00).
- Number
- R909600462
- Type code
- AA11VLO250NV/10L-NSD62N00
- Group
- A11VLO 250
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902026349 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909600444 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R909600409 | SHIPPING PROTECTION Assembly parts list →L | 1 | ||
| R909600435 | CONTROL Assembly parts list →L | 1 | ||
| R909433430 | CONTROL Assembly parts list →L | 1 | ||
| R902013899 | COVER Assembly parts list →L | 1 | ||
| R909445896 | HOUSING | 1 | ||
| R909439721 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909432481 | SEALING DISK | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153378 | SCREW PLUGD | 1 | ||
| R909830077 | RETAINING RING | 1 | ||
| R909151259 | RETAINING RING | 2 | ||
| R909445547 | PARALLEL KEY | 1 | ||
| R909152981 | SHIM RING | 1 | ||
| R909152982 | SHIM RING | 1 | ||
| R909156764 | SHIM RING | 1 | ||
| R909153371 | SCREW PLUGD | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 250 | 250 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | ‒ ‒ | N00 |