Unit · AXIAL-PISTON PUMP
A11VO200LRU2W/10R-NPD12K66R909600546
Axial piston pump Bosch Rexroth series A11VO, type code A11VO200LRU2W/10R-NPD12K66, material number R909600546. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with electric stroke limiter positive control U = 24 V (LRU2). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12).
- Number
- R909600546
- Type code
- A11VO200LRU2W/10R-NPD12K66
- Group
- A11VO 200
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909600380 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909438675 | CONNECTION PLATE Assembly parts list →L | 1 | ||
| R909446756 | REGULATOR Assembly parts list →L | 1 | ||
| R909437659 | CONTROL Assembly parts list →L | 1 | ||
| R909442851 | CONTROL Assembly parts list →L | 1 | ||
| R909442051 | BELL HOUSING Assembly parts list →L | 1 | ||
| 8 | R909438621 | SWIVEL ANGLE SENSOR Assembly parts list →L | 1 | |
| R909445887 | HOUSING | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153861 | SCREW PLUGD | 1 | ||
| R902123558 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| 98 | R902095612 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 200 | 200 |
| Control device | Power controller fixed setting, with electric stroke limiter positive control U = 24 V | LRU2 |
| Index | Size 145 … 260 | 1 |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |