Unit · AXIAL-PISTON PUMP
A10VG45EZ21/10R-PTC10F022S*G*R909602785
Axial piston pump Bosch Rexroth series A10VG, type code A10VG45EZ21/10R-PTC10F022S*G*, material number R909602785. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar (A10V). Operating mode: pump, closed circuit (G). Control device: two-point control, electric U = 24 V (EZ2). DA control valve for NG28... 63: without DA control valve (1). Direction of rotation: viewed on drive shaft (R). Drive shaft: splined shaft ANSI B92.1a–1976 for combination pump (T). Mounting flange: SAE J744 2-hole (C). Working port (port plate): SAE working port A and B, same side left suction port S bottom (10). Boost pump: integrated boost pump with and without through (F). Through drive: flange SAE J744 hub for splined shaft, 101-2 (B) 7/8 in 13T 16/32DP (02). Filtration boost circuit/external boost pressure supply: filtration in the boost pump suction line (S).
- Number
- R909602785
- Type code
- A10VG45EZ21/10R-PTC10F022S*G*
- Group
- A10VG 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R909602787 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909600925 | CONTROL Assembly parts list →L | 1 | |
| 3 | R909601089 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 4 | R909441840 | INTERNAL GEAR PUMP Assembly parts list →L | 1 | |
| 5 | R909600076 | DIRECTIONAL-CONTROL VALVE Assembly parts list →L | 1 | |
| 10 | R909921062 | HOUSING | 1 | |
| 13 | R902114380 | PIVOT PIN | 1 | |
| 14 | R913009677 | STRAIGHT PIN | 1 | |
| 20 | R909151694 | SCREW PLUGD | 1 | |
| 21 | R909151979 | SCREW PLUGD | 1 | |
| 22 | R909151692 | SCREW PLUGD | 3 | |
| 23 | R909153815 | SCREW PLUGD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 1 | |
| 27 | R909831318 | DOUBLE BREAK-OFF PLUG | 1 | |
| 28 | R909156493 | NOZZLE | 2 | |
| 31 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 41 | R909085364 | O-RINGD | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 300 bar, maximum pressure 350 bar | A10V |
| Operating mode | Pump, closed circuit | G |
| Size (NG) | 45 | 45 |
| Control device | Two-point control, electric U = 24 V | EZ2 |
| DA control valve for NG28... 63 | Without DA control valve | 1 |
| Series | Series 1, index 0 | 10 |
| Direction of rotation | Viewed on drive shaft | R |
| Drive shaft | Splined shaft ANSI B92.1a–1976 for combination pump | T |
| Mounting flange | SAE J744 2-hole | C |
| Working port (port plate) | SAE working port A and B, same side left suction port S bottom | 10 |
| Boost pump | Integrated boost pump with and without through | F |
| Through drive | Flange SAE J744 hub for splined shaft, 101-2 (B) 7/8 in 13T 16/32DP | 02 |
| Filtration boost circuit/external boost pressure supply | Filtration in the boost pump suction line | S |