Unit · AXIAL-PISTON PUMP
A11VLO160DRS/10R-NZD12N00R909613429
Axial piston pump Bosch Rexroth series A11VO, type code A11VLO160DRS/10R-NZD12N00, material number R909613429. Nominal size: NG 160. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Control device: pressure controller with load-sensing (DRS). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: ‒ ‒ (N00).
- Number
- R909613429
- Type code
- A11VLO160DRS/10R-NZD12N00
- Group
- A11VLO 160
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902003146 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909608066 | CONNECTION PLATE, RL Assembly parts list →L | 1 | |
| 3 | R909442389 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909608085 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909442062 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909442927 | COVER Assembly parts list →L | 1 | |
| 10 | R909443598 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 12 | R909650882 | IMPELLER, RIGHT-HAND ROTATION | 1 | |
| 20 | R909445855 | SETSCREW | 2 | |
| 22 | R909152459 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909830779 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909085367 | O-RINGD | 1 | |
| 27 | R909153861 | SCREW PLUGD | 2 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 29 | R909151258 | RETAINING RING | 1 | |
| 30 | R909083362 | RETAINING RING | 1 | |
| 40 | R909151979 | SCREW PLUGD | 1 | |
| 98 | R902095630 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 160 | 160 |
| Control device | Pressure controller with load-sensing | DRS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | ‒ ‒ | N00 |