Unit · BASE UNIT
G A10VSO 16 OV /30R-PPA12N00MESSEMODELR910929741
Base unit Bosch Rexroth series A10VSO, type code GA10VSO16OV/30R-PPA12N00MESSEMODEL, material number R910929741. Nominal size: NG 16. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid (P). Drive shaft: parallel keyed shaft DIN 6885 permissible through-drive torque (P). Mounting flange: ISO 3019-2 2-hole (A). Working port: SAE flange ports according to ISO 6162, metric fastening thread laterally opposite (12). Through drive: without through drive (N00).
- Number
- R910929741
- Type code
- G A10VSO 16 OV /30R-PPA12N00MESSEMODEL
- Group
- A10VSO 16
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910925328 | PUMP HOUSING | 1 | |
| R910976709 | CONNECTION PLATE | 1 | ||
| 3 | R910929746 | DRIVE SHAFT | 1 | |
| R910125504 | PARALLEL KEY | 1 | ||
| 5 | R910704954 | TAPERED-ROLLER BEARING | 1 | |
| 6 | R909086994 | TAPERED-ROLLER BEARING | 1 | |
| 7 | R902403815 | RETAINING RING | 1 | |
| 8 | R910900853 | SHAFT SEALING RINGD | 1 | |
| R902400729 | ADJUSTMENT SHIM | 1 | ||
| 11 | R910231991 | SOCKET HEAD CAP SCREW | 4 | |
| R910904676 | SETSCREW | 1 | ||
| R910998240 | NUT | 1 | ||
| R910904041 | CAP NUT | 1 | ||
| 15 | R909153816 | SCREW PLUGD | 1 | |
| R909831318 | DOUBLE BREAK-OFF PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 16 | 16 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid | P |
| Drive shaft | Parallel keyed shaft DIN 6885 permissible through-drive torque | P |
| Mounting flange | ISO 3019-2 2-hole | A |
| Working port | SAE flange ports according to ISO 6162, metric fastening thread laterally opposite | 12 |
| Through drive | Without through drive | N00 |