Unit · BASE UNIT
G AA10VSO 16 OV /30R-PKC62N00 -SO 13R910942739
Base unit Bosch Rexroth series A10VSO, type code GAA10VSO16OV/30R-PKC62N00-SO13, material number R910942739. Nominal size: NG 16. Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid (P). Drive shaft: parallel keyed shaft permissible through-drive torque ISO 3019-1 (K). Mounting flange: ISO 3019-1 2-hole (C). Working port: SAE flange ports according to ISO 6162, UNC fastening thread laterally opposite (62). Through drive: without through drive (N00). Special version no. 13.
- Number
- R910942739
- Type code
- G AA10VSO 16 OV /30R-PKC62N00 -SO 13
- Group
- A10VSO 16
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910940435 | ROTARY GROUP Assembly parts list →L | 1 | |
| R902538172 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| 5 | R910925613 | PUMP HOUSING | 1 | |
| 6 | R902534372 | CONNECTION PLATE | 1 | |
| 7 | R910960809 | SWASH PLATE | 1 | |
| 8 | R902413731 | DRIVE SHAFT | 1 | |
| 9 | R910930528 | PARALLEL KEY | 1 | |
| R902400729 | ADJUSTMENT SHIM | 1 | ||
| 15 | R910704954 | TAPERED-ROLLER BEARING | 1 | |
| R909086994 | TAPERED-ROLLER BEARING | 1 | ||
| R910925266 | BEARING SHELL | 2 | ||
| R910900853 | SHAFT SEALING RINGD | 1 | ||
| R910926045 | O-RINGD | 1 | ||
| R913052101 | R-RINGD | 4 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910231991 | SOCKET HEAD CAP SCREW | 4 | ||
| R909153371 | SCREW PLUGD | 1 | ||
| 31 | R909831319 | DOUBLE BREAK-OFF PLUG | 1 | |
| R910277193 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Operating mode | Pump, open circuit | O |
| Size (NG) | 16 | 16 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber) only with use of HFA, HFB, HFC hydraulic fluid | P |
| Drive shaft | Parallel keyed shaft permissible through-drive torque ISO 3019-1 | K |
| Mounting flange | ISO 3019-1 2-hole | C |
| Working port | SAE flange ports according to ISO 6162, UNC fastening thread laterally opposite | 62 |
| Through drive | Without through drive | N00 |