Unit · AXIAL-PISTON PUMP
AA10VO140DFLR/31L-PSD62P42R910963922
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO140DFLR/31L-PSD62P42, material number R910963922. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure, flow and power controller (DFLR). Direction of rotation: viewed on drive shaft Counter-clockwise (L). Mounting flange: based on ISO 3019-1 (SAE) 2/4-hole (D). Working port: SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom For through drive (62). Connector for solenoids: DEUTSCH - molded connector, 2-pin, without suppressor diode (P).
- Number
- R910963922
- Type code
- AA10VO140DFLR/31L-PSD62P42
- Group
- A10VO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R910962857 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R910920180 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R910920244 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902533217 | CONTROL VALVE Assembly parts list →L | 1 | |
| 5 | R910984436 | ADAPTER Assembly parts list →L | 1 | |
| 6 | R910799998 | SOCKET HEAD CAP SCREW | 4 | |
| 10 | R910964726 | PIPING Assembly parts list →L | 1 | |
| 11 | R910921642 | POWER DIAGRAM | 1 | |
| 12 | R910963876 | GEAR PUMP | 1 | |
| 14 | R909154478 | SCREW PLUG | 1 | |
| 61 | R910109762 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 140 | 140 |
| Control device | Pressure, flow and power controller | DFLR |
| Series | Series 3, index 1 | 31 |
| Direction of rotation | Viewed on drive shaft Counter-clockwise | L |
| Mounting flange | Based on ISO 3019-1 (SAE) 2/4-hole | D |
| Working port | SAE flange connections according to ISO 6162, working ports UNC Fastening thread UNC; lateral top bottom For through drive | 62 |
| Connector for solenoids | DEUTSCH - molded connector, 2-pin, without suppressor diode | P |