Unit · BASE UNIT
GA10VSO71DFE/31R-VRC12K07LR-SO469R910975500
Base unit Bosch Rexroth series A10VSO, type code GA10VSO71DFE/31R-VRC12K07LR-SO469, material number R910975500. Nominal size: NG 71. Version: standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Drive shafts: splined shaft ANSI B92.1a same as shaft "S", but for higher torque (R). Working port: SAE flange ports, laterally opposite fastening thread, metric (12). Special version no. 469.
- Number
- R910975500
- Type code
- GA10VSO71DFE/31R-VRC12K07LR-SO469
- Group
- A10VSO 71
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910985876 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910935916 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R910988073 | PUMP HOUSING | 1 | ||
| R902424002 | CONNECTION PLATE | 1 | ||
| R902467246 | SWASH PLATE | 1 | ||
| R902412030 | DRIVE SHAFT | 1 | ||
| R910939005 | ADJUSTMENT SHIM | 1 | ||
| 14 | R910987843 | STOP RING | 1 | |
| R910720224 | TAPERED-ROLLER BEARING | 1 | ||
| R910720232 | TAPERED-ROLLER BEARING | 1 | ||
| R910902777 | BEARING SHELL | 2 | ||
| R909831661 | SHAFT SEALING RINGD | 1 | ||
| R910764728 | O-RINGD | 1 | ||
| R913052117 | R-RINGD | 4 | ||
| R910631175 | O-RINGD | 1 | ||
| R910941918 | RETAINING RING | 1 | ||
| R910110272 | SOCKET HEAD CAP SCREW | 4 | ||
| 30 | R910967343 | SCREW PLUGD | 1 | |
| R909831319 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R902533908 | STRAIGHT PIN | 1 | ||
| 34 | R913011609 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | Standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 71 | 71 |
| Series | Series 3, index 1 | 31 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Drive shafts | Splined shaft ANSI B92.1a same as shaft "S", but for higher torque | R |
| Working port | SAE flange ports, laterally opposite fastening thread, metric | 12 |