Unit · BASE UNIT
G A10VSO 18 FEO /31R-VSC12N00 LR -SO203R910979594
Base unit Bosch Rexroth series A10VSO, type code GA10VSO18FEO/31R-VSC12N00LR-SO203, material number R910979594. Nominal size: NG 18. Version: standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10VS). Operating mode: pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Drive shafts: splined shaft Standard shaft ANSI B92.1a (S). Working port: SAE flange ports, laterally opposite fastening thread, metric (12). Through drives: without through drive (N00). Special version no. 203.
- Number
- R910979594
- Type code
- G A10VSO 18 FEO /31R-VSC12N00 LR -SO203
- Group
- A10VSO 18
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910985873 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910975768 | ADJUSTING PIECE Assembly parts list →L | 1 | ||
| R902422379 | PUMP HOUSING | 1 | ||
| R902534370 | CONNECTION PLATE | 1 | ||
| R910960986 | SWASH PLATE | 1 | ||
| R902413746 | DRIVE SHAFT | 1 | ||
| R902400729 | ADJUSTMENT SHIM | 1 | ||
| 14 | R910990150 | STOP RING | 1 | |
| R910704954 | TAPERED-ROLLER BEARING | 1 | ||
| R909086994 | TAPERED-ROLLER BEARING | 1 | ||
| R910925266 | BEARING SHELL | 2 | ||
| R902400728 | ROTARY SHAFT LIP SEALD | 1 | ||
| R910928325 | O-RINGD | 1 | ||
| R913052100 | R-RINGD | 4 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910231991 | SOCKET HEAD CAP SCREW | 4 | ||
| R909156649 | SCREW PLUGD | 1 | ||
| R909156864 | SCREW PLUGD | 1 | ||
| R909831319 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910277193 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Version | Standard version (without symbol), swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10VS |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 18 | 18 |
| Series | Series 3, index 1 | 31 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Drive shafts | Splined shaft Standard shaft ANSI B92.1a | S |
| Working port | SAE flange ports, laterally opposite fastening thread, metric | 12 |
| Through drives | without through drive | N00 |