Unit · AXIAL-PISTON PUMP

AHA10VO100DFR1/31R-PUC61N00-SO646R910986684

Axial piston pump Bosch Rexroth series A10VO, type code AHA10VO100DFR1/31R-PUC61N00-SO646, material number R910986684. Nominal size: NG 100. Version: high-speed version (external dimensions are the same as the standard version) (H). Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged, with flushing function (DFR1). Direction of rotation: viewed on drive shaft Clockwise (R). Drive shaft: reduced diameter; limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive (61). Through drive: without through drive (N00). Special version no. 646.

Number
R910986684
Type code
AHA10VO100DFR1/31R-PUC61N00-SO646
Group
A10VO 100
Edition
06/2020
AHA10VO100DFR1/31R-PUC61N00-SO646 — Drawing
Pos.NumberNameQtyAdd to inquiry
1R910975579BASE UNIT Assembly parts list →L1
2R902539691CONTROL VALVE Assembly parts list →L1

Parameters from the type code

ItemMeaningCode
VersionHigh-speed version (external dimensions are the same as the standard version)H
Axial piston unitSwashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi)A10V
Operating modePump, open circuitO
Size (NG)100100
Control deviceWith flow controller X-T plugged, with flushing functionDFR1
SeriesSeries 3, index 131
Direction of rotationViewed on drive shaft ClockwiseR
Drive shaftReduced diameter; limited suitability for through driveU
Mounting flangeBased on ISO 3019-1 (SAE) 2-holeC
Working portSAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive61
Through driveWithout through driveN00

Other versions 2