Unit · BASE UNIT
G A10VSO 10 OV /52L-PKC64N00R910987830
Base unit Bosch Rexroth series A10VSO, type code GA10VSO10OV/52L-PKC64N00, material number R910987830. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10VS). Operating mode: pump, open circuit (O). Direction of rotation: viewed on drive shaft Counter-clockwise (L). Drive shaft: parallel keyed Shaft ISO 3019-1 (K). Mounting flange: based on ISO 3019-1 2-hole (C). Working port: threaded port, UNC Rear (64). Through drive: without through drive (N00).
- Number
- R910987830
- Type code
- G A10VSO 10 OV /52L-PKC64N00
- Group
- A10VSO 10
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R910986944 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910984010 | ADJUSTING PISTON | 1 | ||
| R910984013 | PISTON GUIDE | 1 | ||
| R910984014 | BALL STOP | 1 | ||
| R910987819 | PUMP HOUSING | 1 | ||
| R910987820 | CONNECTION PLATE | 1 | ||
| R910987787 | SWASH PLATE | 1 | ||
| R902413721 | DRIVE SHAFT | 1 | ||
| R910930528 | PARALLEL KEY | 1 | ||
| R910987961 | SEALING FLANGE | 1 | ||
| R910984023 | COMPRESSION SPRING | 1 | ||
| R910984871 | DEEP-GROOVE BALL BEARING | 1 | ||
| R910984012 | NEEDLE BEARING | 1 | ||
| R910972683 | BEARING SHELL | 1 | ||
| R910985220 | BEARING SHELL | 1 | ||
| R902400728 | ROTARY SHAFT LIP SEALD | 1 | ||
| R910984015 | O-RINGD | 1 | ||
| R910977061 | O-RINGD | 1 | ||
| R910942134 | R-RING | 1 | ||
| R910791555 | V-RING | 1 | ||
| R910984021 | RETAINING RING | 1 | ||
| R910984872 | V-RING | 1 | ||
| R902403815 | RETAINING RING | 1 | ||
| R910231991 | SOCKET HEAD CAP SCREW | 4 | ||
| R909153371 | SCREW PLUGD | 1 | ||
| R909831317 | DOUBLE BREAK-OFF PLUG | 1 | ||
| R910757519 | STRAIGHT PIN | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10VS |
| Operating mode | Pump, open circuit | O |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft Counter-clockwise | L |
| Drive shaft | Parallel keyed Shaft ISO 3019-1 | K |
| Mounting flange | Based on ISO 3019-1 2-hole | C |
| Working port | Threaded port, UNC Rear | 64 |
| Through drive | Without through drive | N00 |