Unit · AXIAL-PISTON PUMP

AHA10VO110DFR1/31L-PUC61N00R910997536

Axial piston pump Bosch Rexroth series A10VO, type code AHA10VO110DFR1/31L-PUC61N00, material number R910997536. Nominal size: NG 110. Version: high-speed version (external dimensions are the same as the standard version) (H). Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi) (A10V). Operating mode: pump, open circuit (O). Control device: with flow controller X-T plugged, with flushing function (DFR1). Direction of rotation: viewed on drive shaft Counter-clockwise (L). Drive shaft: reduced diameter; limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive (61). Through drive: without through drive (N00).

Number
R910997536
Type code
AHA10VO110DFR1/31L-PUC61N00
Group
A10VO 110
Edition
06/2020
AHA10VO110DFR1/31L-PUC61N00 — Drawing
Pos.NumberNameQtyAdd to inquiry
R910997507BASE UNIT Assembly parts list →L1
R902450439CONTROL VALVE Assembly parts list →L1

Parameters from the type code

ItemMeaningCode
VersionHigh-speed version (external dimensions are the same as the standard version)H
Axial piston unitSwashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (5100 psi)A10V
Operating modePump, open circuitO
Size (NG)110110
Control deviceWith flow controller X-T plugged, with flushing functionDFR1
SeriesSeries 3, index 131
Direction of rotationViewed on drive shaft Counter-clockwiseL
Drive shaftReduced diameter; limited suitability for through driveU
Mounting flangeBased on ISO 3019-1 (SAE) 2-holeC
Working portSAE flange connections Fastening thread according to ISO 6162, UNC; rear working ports UNC Not for through drive61
Through driveWithout through driveN00