Unit · AXIAL-PISTON MOTOR
AL A10F E 37 /52W-VCF10N000 -S1437R992000741
Axial piston motor Bosch Rexroth series A10FM, type code ALA10FE37/52W-VCF10N000-S1437, material number R992000741. Nominal size: NG 37. Axial piston unit: swashplate design, constant, nominal pressure 280 bar (4100 psi), maximum (A10F). Operating mode: motor, plug-in design, open and closed circuits (E). Direction of rotation: viewed on drive shaft Alternating (W). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: tapered shaft with shaft key and threaded bolt (C). Mounting flange: 2-hole special flange (F). Working port: flange ports according A and B laterally, Fastening thread to ISO 6162 same side, metric (10N00). Valves: without valve (0). Special version no. 1437.
- Number
- R992000741
- Type code
- AL A10F E 37 /52W-VCF10N000 -S1437
- Group
- A10FE 37
- Edition
- 11/2019
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902435770 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R910997211 | MOTOR HOUSING | 1 | ||
| R910989300 | CONNECTION PLATE | 1 | ||
| R910917928 | CAM PLATE | 1 | ||
| R902428689 | DRIVE SHAFT | 1 | ||
| R910751138 | PARALLEL KEY | 1 | ||
| R910938955 | ADJUSTMENT SHIM | 1 | ||
| R910987963 | STOP RING | 1 | ||
| R910704946 | TAPERED-ROLLER BEARING | 1 | ||
| R910704954 | TAPERED-ROLLER BEARING | 1 | ||
| R910985471 | SHAFT SEALING RING | 1 | ||
| — | O-RING | 1 | ||
| R902403814 | RETAINING RING | 1 | ||
| R910110256 | SOCKET HEAD CAP SCREW | 4 | ||
| R910967343 | SCREW PLUG | 1 | ||
| R902533908 | STRAIGHT PIN | 1 | ||
| R910924011 | STRAIGHT PIN | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, constant, nominal pressure 280 bar (4100 psi), maximum | A10F |
| Operating mode | Motor, plug-in design, open and closed circuits | E |
| Size (NG) | 37 | 37 |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft Alternating | W |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | Tapered shaft with shaft key and threaded bolt | C |
| Mounting flange | 2-hole special flange | F |
| Working port | Flange ports according A and B laterally, Fastening thread to ISO 6162 same side, metric | 10N00 |
| Valves | Without valve | 0 |