Unit · AXIAL-PISTON PUMP
AL A10V O63EK1DS/53L-VSD12H00P -S2687R992000985
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO63EK1DS/53L-VSD12H00P-S2687, material number R992000985. Nominal size: NG 63. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged (EK1DS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) 4-hole (D). Working port: SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite (12). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 2687.
- Number
- R992000985
- Type code
- AL A10V O63EK1DS/53L-VSD12H00P -S2687
- Group
- A10VO 63
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902469730 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450439 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902438427 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902438532 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 12 | 0510625395 | HYDRAULIC GEAR PUMPL | 1 | |
| 27 | R910943545 | SPLINED COUPLING | 1 | |
| 30 | R910967343 | SCREW PLUG | 2 | |
| 40 | R910947854 | STOP SCREW | 1 | |
| 41 | R910998240 | NUT | 1 | |
| 42 | R910961839 | CAP NUT | 1 | |
| 43 | R910804886 | O-RING | 2 | |
| 61 | R910109606 | SOCKET HEAD CAP SCREW | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 63 | 63 |
| Control device | pressure and flow control with U = 12 V controller cut-off (load sensing) X-T plugged | EK1DS |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) 4-hole | D |
| Working port | SAE flange ports according to ISO 6162 metric fastening thread metric for through drive laterally opposite | 12 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |
Other versions 9
- R902450561 A A10V O63EK1DS/53L-VSD12H00P -S2027
- R902472271 A A10V O63EK1DS/53L-VSD12H00P -S2687
- R902493876 A A10V O63EK1DS/53L-VSD12H00P -S2687
- R902497643 AL A10V O 63EK1DS/53L-VSD12H00P -S2687
- R902450560 AL A10V O63EK1DS/53L-VSD12H00P -S2027
- R992000841 AL A10V O63EK1DS/53L-VSD12H00P -S2027
- R902493850 AL A10V O63EK1DS/53L-VSD12H00P -S2687
- R992000930 AL A10V O63EK1DS/53L-VSD12H00P -S2687
- R902472270 ALA10VO63EK1DS/53L-VSD12H00P-S2687