Unit · AXIAL-PISTON PUMP
A11VO60LRDS/10L-NZC12K01-SR902014793
Axial piston pump Bosch Rexroth series A11VO, type code A11VO60LRDS/10L-NZC12K01-S, material number R902014793. Nominal size: NG 60. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: power controller fixed setting, with pressure cut-off, with load-sensing (LRDS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: splined shaft DIN 5480 for single and combination pump (Z). Mounting flange: SAE J744 ‒ 2-hole (C). Working port: SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 (12). Through drive: 82-2 (A) 5/8 in 9T 16/32DP A (K01). Standard/special version: special version (S).
- Number
- R902014793
- Type code
- A11VO60LRDS/10L-NZC12K01-S
- Group
- A11VO 60
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902044498 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R909609281 | CONNECTION PLATE, LL Assembly parts list →L | 1 | |
| 3 | R909441272 | REGULATOR Assembly parts list →L | 1 | |
| 4 | R909441157 | CONTROL Assembly parts list →L | 1 | |
| 5 | R909441158 | CONTROL Assembly parts list →L | 1 | |
| 7 | R909446302 | BELL HOUSING Assembly parts list →L | 1 | |
| 10 | R902118163 | HOUSING | 1 | |
| 11 | R902132714 | PIVOT PIN | 4 | |
| 20 | R909449078 | SETSCREW | 2 | |
| 22 | R909152426 | SEALING NUTD | 2 | |
| 24 | R909153364 | SCREW PLUGD | 4 | |
| 25 | R909153680 | SOCKET HEAD CAP SCREW | 4 | |
| 26 | R909830217 | O-RINGD | 1 | |
| 27 | R909151694 | SCREW PLUGD | 2 | |
| 28 | R913016373 | SLOTTED SPRING PIN | 2 | |
| 40 | R909151979 | SCREW PLUG | 1 | |
| 45 | R909429294 | COVER Assembly parts list →L | 1 | |
| 98 | R902095604 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 60 | 60 |
| Control device | Power controller fixed setting, with pressure cut-off, with load-sensing | LRDS |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Splined shaft DIN 5480 for single and combination pump | Z |
| Mounting flange | SAE J744 ‒ 2-hole | C |
| Working port | SAE pressure and suction port lateral, opposite, metric fastening thread according to DIN 13. Port thread, metric with profile sealing ring based on DIN 3852 | 12 |
| Through drive | 82-2 (A) 5/8 in 9T 16/32DP A | K01 |
| Standard/special version | Special version | S |