Unit · AXIAL-PISTON PUMP
A20VLO260DR/10R-NPD24K17R902106367
Axial piston pump Bosch Rexroth series A20VO, type code A20VLO260DR/10R-NPD24K17, material number R902106367. Nominal size: NG 260. Axial piston unit: swashplate design, variable (back to back version) (A20V). Additional function: with charge pump (L). Operating mode: double pump, open circuit (O). Directions of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Mounting flange: ISO 3019-1 4-hole (D). Working port: SAE flanges, two port B and one port S laterally opposite, metric fastening thread (24).
- Number
- R902106367
- Type code
- A20VLO260DR/10R-NPD24K17
- Group
- A20VLO 260
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902021497 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902029419 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902029236 | CONNECTION PLATE Assembly parts list →L | 1 | ||
| R909438066 | REGULATOR Assembly parts list →L | 2 | ||
| R902007015 | CONTROL Assembly parts list →L | 2 | ||
| R909600262 | CONTROL Assembly parts list →L | 2 | ||
| R902094197 | HOUSING | 2 | ||
| 11 | R902029464 | BELL HOUSING Assembly parts list →L | 1 | |
| R902080345 | IMPELLER, RIGHT-HAND ROTATION | 1 | ||
| R902132714 | PIVOT PIN | 8 | ||
| R909921095 | SETSCREW | 4 | ||
| R909153328 | SEALING NUTD | 4 | ||
| R909153364 | SCREW PLUGD | 8 | ||
| R909831387 | SOCKET HEAD CAP SCREW | 8 | ||
| R909831133 | O-RINGD | 2 | ||
| R909153861 | SCREW PLUGD | 5 | ||
| R913016375 | SLOTTED SPRING PIN | 4 | ||
| R909151259 | RETAINING RING | 2 | ||
| R909151979 | SCREW PLUG | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable (back to back version) | A20V |
| Additional function | With charge pump | L |
| Operating mode | Double pump, open circuit | O |
| Size (NG) | 260 | 260 |
| Series | Series 1, index 0 | 10 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Mounting flange | ISO 3019-1 4-hole | D |
| Working port | SAE flanges, two port B and one port S laterally opposite, metric fastening thread | 24 |