Unit · AXIAL-PISTON PUMP
AA11VLO130EP4D/10L-XSDXXK17T-SR902203035
Axial piston pump Bosch Rexroth series A11VO, type code AA11VLO130EP4D/10L-XSDXXK17T-S, material number R902203035. Nominal size: NG 130. Axial piston unit: swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar (A11V). Operating mode: pump, open circuit with charge pump (LO). Direction of rotation: viewed on drive shaft counter-clockwise (L). Drive shaft: splined shaft ANSI B92.1a‒1976 for single pump (S). Mounting flange: SAE J744 ‒ 4-hole (D). Through drive: 152-4 (D) 1 3/4 in 13T 8/16DP D (K17). Standard/special version: special version (S).
- Number
- R902203035
- Type code
- AA11VLO130EP4D/10L-XSDXXK17T-S
- Group
- A11VLO 130
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R902041956 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R902202929 | CONNECTION PLATE, LL Assembly parts list →L | 1 | ||
| R902262278 | REGULATOR Assembly parts list →L | 1 | ||
| R909601773 | CONTROL Assembly parts list →L | 1 | ||
| R909601776 | CONTROL Assembly parts list →L | 1 | ||
| R902202930 | BELL HOUSING Assembly parts list →L | 1 | ||
| R902117353 | HOUSING | 1 | ||
| R902132714 | PIVOT PIN | 4 | ||
| R909921290 | IMPELLER, LEFT-HAND ROTATATION | 1 | ||
| R909449078 | SETSCREW | 2 | ||
| R909152426 | SEALING NUTD | 2 | ||
| R909156649 | SCREW PLUGD | 4 | ||
| R909830782 | SOCKET HEAD CAP SCREW | 4 | ||
| R909831545 | O-RINGD | 1 | ||
| R910967351 | SCREW PLUG | 2 | ||
| R913016373 | SLOTTED SPRING PIN | 2 | ||
| R909083360 | RETAINING RING | 2 | ||
| R902220059 | SHUTTLE VALVE Assembly parts list →L | 1 | ||
| R902600612 | BLEEDER VALVE | 2 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 350 bar, maximum pressure 400 bar | A11V |
| Operating mode | Pump, open circuit with charge pump | LO |
| Size (NG) | 130 | 130 |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Drive shaft | Splined shaft ANSI B92.1a‒1976 for single pump | S |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Through drive | 152-4 (D) 1 3/4 in 13T 8/16DP D | K17 |
| Standard/special version | Special version | S |