Unit · AXIAL-PISTON PUMP
A A10V O140LA7DS/32R-VSD62K68 -SO108R902501989
Axial piston pump Bosch Rexroth series A10VO, type code AA10VO140LA7DS/32R-VSD62K68-SO108, material number R902501989. Nominal size: NG 140. Axial piston unit: swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar (A10V). Operating mode: pump, open circuit (O). Control devices: pressure cut-off from 91 to 160 bar, separate flow control hydraulic beginning of control.D (LA7DS). Directions of rotation: viewed on drive shaft clockwise (R). Seal: FKM (fluorocarbon rubber) (V). Mounting flange: based on ISO 3019-1 (SAE) SAE C; 4-hole (D). Working port: top, bottom, opposite, fastening thread UNC (62). Through drive: 101-2 (B) 7/8 in 13T 16/32DP (K68). Special version no. 108.
- Number
- R902501989
- Type code
- A A10V O140LA7DS/32R-VSD62K68 -SO108
- Group
- A10VO 140
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902473715 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902448799 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902533220 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R910932938 | ADAPTER Assembly parts list →L | 1 | |
| 5 | R910996454 | DIRECTIONAL SPOOL VALVE Assembly parts list →L | 1 | |
| 6 | R902433696 | CONTROL BLOCK | 1 | |
| 7 | R910478474 | SOCKET HEAD CAP SCREW | 4 | |
| 8 | R902434482 | SEAL | 1 | |
| 9 | R910785105 | SOCKET HEAD CAP SCREW | 4 | |
| 10 | R902501991 | PIPING Assembly parts list →L | 1 | |
| 12 | R910764647 | SCREW PLUG | 1 | |
| 30 | R910967351 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar (4100 psi), maximum pressure 350 bar | A10V |
| Operating mode | Pump, open circuit | O |
| Sizes (NG) | 140 | 140 |
| Control devices | pressure cut-off from 91 to 160 bar, separate flow control hydraulic beginning of control.D | LA7DS |
| Series | Series 3, index 2 | 32 |
| Directions of rotation | Viewed on drive shaft clockwise | R |
| Seal | FKM (fluorocarbon rubber) | V |
| Mounting flange | Based on ISO 3019-1 (SAE) SAE C; 4-hole | D |
| Working port | top, bottom, opposite, fastening thread UNC | 62 |
| Through drive | 101-2 (B) 7/8 in 13T 16/32DP | K68 |