Unit · AXIAL-PISTON PUMP
AA11VO200DR/10R-NPD62N00R909600474
Axial piston pump Bosch Rexroth series A11VO, type code AA11VO200DR/10R-NPD62N00, material number R909600474. Nominal size: NG 200. Axial piston unit: swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi (A11V). Operating mode: pump, open circuit without charge pump (O). Control device: pressure controller (DR). Direction of rotation: viewed on drive shaft clockwise (R). Sealing material: NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) (N). Drive shaft: parallel keyed shaft DIN 6885 (P). Mounting flange: SAE J744 ‒ 4-hole (D). Working port: SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 (62). Through drive: ‒ ‒ (N00).
- Number
- R909600474
- Type code
- AA11VO200DR/10R-NPD62N00
- Group
- A11VO 200
- Edition
- 06/2020
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| R909600379 | ROTARY GROUP Assembly parts list →L | 1 | ||
| R909600445 | CONNECTION PLATE, RL Assembly parts list →L | 1 | ||
| R909600271 | REGULATOR Assembly parts list →L | 1 | ||
| R909429580 | CONTROL Assembly parts list →L | 1 | ||
| R909429581 | CONTROL Assembly parts list →L | 1 | ||
| R902013899 | COVER Assembly parts list →L | 1 | ||
| R909445889 | HOUSING | 1 | ||
| R909445854 | SETSCREW | 1 | ||
| R909445855 | SETSCREW | 1 | ||
| R909152459 | SEALING NUTD | 2 | ||
| R913009671 | STRAIGHT PIN | 1 | ||
| R909153378 | SCREW PLUGD | 1 | ||
| R909153371 | SCREW PLUGD | 1 | ||
| 98 | R902095611 | SEAL KIT | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 5100 psi (350 bar), maximum pressure 5800 psi | A11V |
| Operating mode | Pump, open circuit without charge pump | O |
| Size (NG) | 200 | 200 |
| Control device | Pressure controller | DR |
| Index | Size 40 … 130 | 0 |
| Direction of rotation | Viewed on drive shaft clockwise | R |
| Sealing material | NBR (nitrile rubber), shaft seal ring FKM (fluorocarbon rubber) | N |
| Drive shaft | Parallel keyed shaft DIN 6885 | P |
| Mounting flange | SAE J744 ‒ 4-hole | D |
| Working port | SAE pressure and suction port at side, opposite, UNC fastening thread. Port thread, UNF with profile sealing ring based on ISO 11926 | 62 |
| Through drive | ‒ ‒ | N00 |