Unit · AXIAL-PISTON PUMP
AL A10V O85EK2DS/53L-VUC11N00P -S3420R902492867
Axial piston pump Bosch Rexroth series A10VO, type code ALA10VO85EK2DS/53L-VUC11N00P-S3420, material number R902492867. Nominal size: NG 85. Axial piston unit: swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) (A10V). Operating mode: pump, open circuit (O). Control device: pressure and flow control with controller cut-off (load sensing) U = 24 V (EK2DS). Direction of rotation: viewed on drive shaft counter-clockwise (L). Sealing material: FKM (fluorocarbon rubber) (V). Drive shaft: reduced diameter, limited suitability for through drive (U). Mounting flange: based on ISO 3019-1 (SAE) 2-hole (C). Working port: SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive (11). Through drive: without through drive (N00). Connector for solenoids: DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) (P). Special version no. 3420.
- Number
- R902492867
- Type code
- AL A10V O85EK2DS/53L-VUC11N00P -S3420
- Group
- A10VO 85
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902452885 | BASE UNIT Assembly parts list →L | 1 | |
| 2 | R902450441 | CONTROL VALVE Assembly parts list →L | 1 | |
| 3 | R902484972 | CONTROL VALVE Assembly parts list →L | 1 | |
| 4 | R902510242 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 30 | R910967351 | SCREW PLUG | 2 | |
| 40 | R902429967 | STOP SCREW | 1 | |
| 43 | R910919314 | O-RING | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 250 bar (3600 psi), maximum pressure 315 bar (4550 psi) | A10V |
| Operating mode | Pump, open circuit | O |
| Size (NG) | 85 | 85 |
| Control device | pressure and flow control with controller cut-off (load sensing) U = 24 V | EK2DS |
| Series | Series 5, index 3 | 53 |
| Direction of rotation | Viewed on drive shaft counter-clockwise | L |
| Sealing material | FKM (fluorocarbon rubber) | V |
| Drive shaft | reduced diameter, limited suitability for through drive | U |
| Mounting flange | Based on ISO 3019-1 (SAE) 2-hole | C |
| Working port | SAE flange ports fastening thread metric rear according to ISO 6162 metric not for through drive | 11 |
| Through drive | Without through drive | N00 |
| Connector for solenoids | DEUTSCH – molded connector, 2-pin – without suppressor diode (for electric controls) | P |
Other versions 16
- R902452705 A A10V O85EK2DS/53L-VUC11N00P -S2257
- R902492868 A A10V O85EK2DS/53L-VUC11N00P -S3420
- R902497204 A A10V O85EK2DS/53L-VUC11N00P -S3591
- R902492262 A A10V O85EK2DS/53L-VUC11N00P -S3704
- R902465037 A A10V O85EK2DS/53L-VUC11N00P -SO413
- R902455898 AA10VO85EK2DS/53L-VUC11N00P-S2289
- R902430089 AL A10V O85EK2DS/53L-VUC11N00P -S2257
- R902459100 AL A10V O85EK2DS/53L-VUC11N00P -S2257
- R992000751 AL A10V O85EK2DS/53L-VUC11N00P -S2257
- R992000876 AL A10V O85EK2DS/53L-VUC11N00P -S2257
- R902497203 AL A10V O85EK2DS/53L-VUC11N00P -S3591
- R902497205 AL A10V O85EK2DS/53L-VUC11N00P -S3591
- R992000990 AL A10V O85EK2DS/53L-VUC11N00P -S3591
- R902492261 AL A10V O85EK2DS/53L-VUC11N00P -S3704
- R902465703 AL A10V O85EK2DS/53L-VUC11N00P -SO413
- R902455897 ALA10VO85EK2DS/53L-VUC11N00P-S2289