Unit · AXIAL-PISTON MOTOR
AA10VEC45HZ/52WXX-PRFCATF.975145R910985538
Axial piston motor Bosch Rexroth series A10VM, type code AA10VEC45HZ/52WXX-PRFCATF.975145, material number R910985538. Nominal size: NG 45. Axial piston unit: swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar (A10V). Control devices: two-point control hydraulic without switching time (HZ). Direction of rotation: viewed on drive shaft bi-directional (W). Drive shaft: splined shaft similar to ISO 3019-1 for high torque (R). Mounting flange: special flange; 2 hole (F).
- Number
- R910985538
- Type code
- AA10VEC45HZ/52WXX-PRFCATF.975145
- Group
- A10VEC 45
- Edition
- 06/2020
This parts list has no drawing.
| Pos. | Number | Name | Qty | Add to inquiry |
|---|---|---|---|---|
| 1 | R902435770 | ROTARY GROUP Assembly parts list →L | 1 | |
| 2 | R902443505 | SWASH PLATE | 1 | |
| 3 | R902408467 | DRIVE SHAFT | 1 | |
| 4 | R910985585 | BEARING SET | 1 | |
| 5 | R910988936 | SEAL KIT | 1 | |
| 6 | R910985540 | SEAL KIT | 1 | |
| 7 | R902426124 | DIRECTIONAL-CONTROL VALVE Assembly parts list →L | 1 | |
| 8 | R902533908 | STRAIGHT PIN | 1 | |
| 9 | R910933792 | BEARING SHELL | 2 | |
| 10 | R910984984 | ADJUSTING PIECE Assembly parts list →L | 1 | |
| 11 | R910985542 | VALVE HOUSING Assembly parts list →L | 1 | |
| 12 | R910110159 | SOCKET HEAD CAP SCREW | 4 | |
| 13 | R910700789 | SOCKET HEAD CAP SCREW | 4 | |
| 14 | R910926045 | O-RING | 1 | |
| 15 | R910985588 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 16 | R910984803 | CONNECTION PLATE Assembly parts list →L | 1 | |
| 17 | R910984781 | BRAKE VALVE Assembly parts list →L | 1 | |
| 18 | R910984812 | PRESSURE RELIEF VALVE Assembly parts list →L | 2 | |
| 19 | R902038539 | CHECK VALVE | 2 | |
| 20 | R902407296 | VALVE | 1 | |
| 21 | R902423170 | SHUTTLE VALVE | 1 | |
| 22 | R902400712 | BRAKE RELEASE VALVE Assembly parts list →L | 1 | |
| 23 | R910985543 | SCREW PLUG | 1 |
Parameters from the type code
| Item | Meaning | Code |
|---|---|---|
| Axial piston unit | Swashplate design, variable, nominal pressure 280 bar, maximum pressure 350 bar | A10V |
| Size (NG) | 45 | 45 |
| Control devices | Two-point control hydraulic without switching time | HZ |
| Series | Series 5, index 2 | 52 |
| Direction of rotation | Viewed on drive shaft bi-directional | W |
| Drive shaft | Splined shaft similar to ISO 3019-1 for high torque | R |
| Mounting flange | Special flange; 2 hole | F |