PartsHydraulics
EXPAND MENU
COLLAPSE MENU
A6VM055EP100P000E/65MWV0M4Z61D0-S (R902248142)
Axial piston variable motor A6VM Series 65. Geometric displacement 055 cm3. Control device: proportional control, electrical, positive control, U = 12 V. Without pressure control/override. Connector for solenoids: DEUTSCH - molded connector, 2-pin, without suppressor diode. Without additional function. Without damping. Setting range for displacement: Short Vg max setting screw, short (0-adjustable) Vg min setting screw. Metric, port threads with O-ring sealing according to ISO 6149. Sealing material: FKM (fluoroelastomer). Standard shaft bearing. Mounting flange ISO 3019-2 125-4. Splined shaft W30x2x14x9g. SAE working ports A and B at rear. With flushing and boost pressure valve, mounted flushing on both sides, flushing flow at: Δp = pND ‒ pG = 25 bar and v = 10 mm2/s (pND = low pressure, pG = case pressure). Flushing flow: 10. Without speed sensor. Special version.
The above diagrams belong to Rexroth www.boschrexroth.com