A4VG210EP2DP000/40MRNE4A31BE4T2AS00-0 (R902274608)

Axial piston variable pump A4VG, swashplate design, nominal pressure 450 bar, maximum pressure 500 bar. Pump, closed circuit. Geometric displacement 210 cm³. Proportional control, electric U = 24 V. Pressure cut-off, with bypass. Fixed setting, hydraulic, mechanical. DEUTSCH molded connector, 2-pin – without suppressor diode. Without swivel angle sensor. Without additional function. Without DA control valve. Series 40. Metric ports according to ISO 6149 with O-ring seal, metric fastening thread according to DIN 13. Direction of rotation: clockwise (viewed on drive shaft). Sealing material: NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer). Mounting flange SAE J744 165-4. Splined shaft DIN 5480 W55×2×26×9g. SAE working port A and B, on left side (45° left). Standard rotary group, boost pump integrated, large internal gear pump. Flange SAE J744: diameter- DDD, mounting- squarely, code- E4. Hub for splined shaft: diameter- 2 in 15T 8/16DP, code- T2. High-pressure relief valve, direct operated, fixed setting, with low-pressure relief valve, fixed setting. Filtration in the boost pump suction line.