A4VG065EP2DP0T1/40MLNC6Z91FC2S7AB00-0 (R902136706)

Axial piston variable pump A4VG, swashplate design, nominal pressure 450 bar, maximum pressure 500 bar. Pump, closed circuit. Geometric displacement 065 cm³. Proportional control, electric U = 24 V. Pressure cut-off, with bypass. Fixed setting, hydraulic, mechanical. DEUTSCH molded connector, 2-pin – without suppressor diode. Without swivel angle sensor. Stroking chamber pressure port X₃ X₄. DA control valve, fixed setting. Series 40. Metric ports according to ISO 6149 with O-ring seal, metric fastening thread according to DIN 13. Direction of rotation: counter-clockwise (viewed on drive shaft). Sealing material: NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer). Mounting flange SAE J744 127-2/4. Splined shaft DIN 5480 W40×2×18×9g. SAE working port A and B, on left side (45° left). Standard rotary group, boost pump integrated, standard internal gear pump. Flange SAE J744: diameter- 127-2 (C), mounting- horizontally, code- C2. Hub for splined shaft: diameter- 1 1/4 in 14T 12/24DP, code- S7. High-pressure relief valve, direct operated, fixed setting, with low-pressure relief valve, fixed setting. Filtration in the boost pump pressure line. Attachment filter with cold start valve and electric contamination indicator – DEUTSCH connector.