A4VG085EP2CP0U0/40MRNC6Z81FB1S5AS40-0 (R902161608)

Axial piston variable pump A4VG, swashplate design, nominal pressure 450 bar, maximum pressure 500 bar. Pump, closed circuit. Geometric displacement 085 cm³. Proportional control, electric U = 24 V. Without pressure cut-off, with bypass. DEUTSCH molded connector, 2-pin – without suppressor diode. Without swivel angle sensor. Neutral valve U = 24 V. Without DA control valve. Series 40. Metric ports according to ISO 6149 with O-ring seal, metric fastening thread according to DIN 13. Direction of rotation: clockwise (viewed on drive shaft). Sealing material: NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer). Mounting flange SAE J744 127-2/4. SAE working port A and B, on left side (45° left). Standard rotary group, boost pump integrated, standard internal gear pump. Flange SAE J744: diameter- 101-2 (B), mounting- vertical, code- B1. Hub for splined shaft: diameter- 7/8 in 13T 16/32DP, code- S5. High-pressure relief valve, direct operated, fixed setting, with low-pressure relief valve, fixed setting. Filtration in the boost pump suction line. Witch pressure sensors at the measuring ports M_A and M_B (high pressure).